The Importance Of Test And Balance Report

Posted by Unknown on 1:26 AM with No comments
By Zelma Hurley


Once the HVAC system has been installed the final step to consider is the testing and balancing process. When the engineer designs the heat and ventilation air conditioning system, there are procedures that should be followed. They will determine the temperature indoors and the humidity as well that must be maintained in a certain space. The conditions of the outdoor designs will also be identified based on the geographic location.

The maximum number of individuals will also be determined who will be occupying the space and the appliance and lighting loads anticipated. From this information of proper ventilation requirements, the amount of the outdoor air will be determined and will be brought into the space. This is just the beginning of the test and balance report Chicago that a contractor will produce.

Once the installation of the system is complete, a professional can now conduct the testing of the system to determine what quantities of air will be delivered and proper balancing of the system to ensure that quantities specified by the engineer at each outlet are being delivered properly. The process is a simple way to know the design air quantities delivered to the unit at the required conditions of each air outlet.

It also provides certain details to be certain that the units handle the specified total quantities of air and to ensure that the unit is operating based in the specifications of the manufacturer. If the system used chilled or condenser water the test and balance process will also include measuring of water quantities that pass throughout the unit and the temperature of the entering and exiting water.

The importance of the process cannot be overemphasized. After all, this is a great way to conduct proper measurements to determine whether the system performs as specified and designed. These procedures are also used to take measurement needed for the whole process. Therefore, the need for a contractor that is unrelated to the process is obvious.

Actually, the tools and instruments are widely used to take precise measurements. They are also sensitive and expensive. In the HVAC industry, this process is very important and becomes a specialty performed by contractors who are members of the national groups. Once the work has been completed, the contractors will issue their report about the system.

If these contractors cannot produce the systems to deliver the required air design quantities, then may be because of the installation or designs. Mots often, the reports show discrepancies between the measured quantities and the air designs that lead to maintenance problems. Typically, the testing and balancing reports are considered as report cards of the performance and functions of the systems.

Due to its importance, it is strongly recommended to hire a contractor directly by the retailer in Chicago IL rather than being hired by an HVAC subtractor or general contractor. Without asking the integrity of the contractors as a team, there is also a possibility that issues will be overlooked when the repair of issues will be the responsibility of the person who is paying you.

These reports can also determine if an issue is cause by poorly installed systems or a poor design. Knowing the great importance of the test and balance process the next step to think about the learning to read the report.




About the Author: